Environmental Applications Bulletin – MyronLMeters.com

Posted by 4 Oct, 2012

TweetEnvironmental Applications Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever-increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of […]

Environmental Applications
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever-increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in many cases, there are restrictions on wastewater that is discharged to city sewer systems or to other publicly owned treatment facilities. Many jurisdictions even restrict or regulate the runoff of storm water — affecting not only industrial and commercial land, but also residential properties as well.

In its simplest form, water pollution management requires impoundment of storm water runoff for a specified period of time before being discharged. Normally, a few simple tests such as pH and suspended solids must be checked to verify compliance before release. If water is used in any way prior to discharge, then the monitoring requirements can expand significantly. For example, if the water is used for once-through cooling, testing may include temperature, pH, total dissolved solids (TDS), chemical oxygen demand (COD), and biochemical oxygen demand (BOD), to name a few.

Once water is used in a process, some form of treatment is often required before it can be discharged to a public waterway. If wastewater is discharged to a city sewer or publicly owned facility, and treatment is required, the quality is often measured and the cost is based not only on the quantity discharged, but also the amount of treatment required. As a minimum requirement suspended solids must be removed. Filtering or using clarifiers often accomplishes such removal. Monitoring consists of measuring total suspended solids (TSS) or turbidity.

If inorganic materials have been introduced into the water, their concentration must be reduced to an acceptable level. Inorganics, such as heavy metals, typically are removed by raising the pH to form insoluble metal oxides or metal hydroxides. The precipitated contaminants are filtered or settled out. Afterward, the pH must be adjusted back into a “normal” range, which often requires continuous monitoring of pH.

Organic materials by far require the most extensive treatment. Many different methods have been devised to convert soluble organic compounds into insoluble inorganic matter. Most of these involve some form of biological oxidation treatment. Bacteria are used to metabolize the organic materials into carbon dioxide and solids, which can be easily removed. To insure that these processes work smoothly and efficiently requires regular monitoring of the health of the biological organisms. The level of food (organic material), nutrients (nitrogen and phosphorous), dissolved oxygen, and pH are some of the parameters that must be controlled. After bio-oxidation the wastewater is filtered or clarified. Often the final effluent is treated with an oxidizing compound such as chlorine to kill any remaining bacterial agents, but any excess oxidant normally must be removed prior to discharge. Oxidation Reduction Potential (ORP)/Redox is ideal for monitoring the level of oxidants before and after removal. The final effluent stream must be monitored to make sure it meets all regulatory requirements.

The monitoring of wastewater pollution does not end there. Scientists are continuously testing water in streams, ground water, lakes, lagoons, and other bodies of water to determine if and what effects any remaining contamination is having on the receiving waters and its associated aquatic life. Measurements may include pH, conductivity, TDS, temperature, dissolved oxygen, TSS and organic levels (COD and BOD).

Environmental testing is not limited to monitoring of wastewater systems. Control of air emissions often includes gas-cleaning systems that involve the use of water. Wet scrubbers and wet electrostatic precipitators are included in this group. A flue gas desulfurization (FGD) system is one type of wet scrubber that uses slurry of lime, limestone, or other caustic material to react with sulfur compounds in the flue gas. The key to reliable operation of these units is proper monitoring of solids levels and pH. After use, the water in these systems must be treated or added to other wastewater from the plant, where it is treated by one of the methods previously discussed.
With proper monitoring, systems that maintain cleaner air and water can be operated efficiently and effectively. Such operation will go a long way toward maintaining a cleaner environment for future generations.

Myron L Meters offers a full line of handheld instruments and in-line monitor/controllers that can be used to measure or monitor many of the parameters previously mentioned. The following table lists some of the model numbers for measuring, monitoring, or controlling pH, conductivity, TDS and ORP. For additional information, please refer to our data sheets or Ask An Expert at MyronLMeters.com.

Note: When using a monitor/controller to measure pH in streams that contain heavy metals, sulfides, or other materials that react with silver, Myron L Meters recommends using a double junction pH sensor with a potassium nitrate (KNO3) reference gel to avoid fouling the silver electrode. See our 720II Sensor Selection Guide for pH and ORP Monitor/controllers for more information.
Recommended handheld:

Ultrameter II 6P

 

 

 

 

 

 

 

 

http://www.myronlmeters.com/Ultrameter-II-6P-Multiparameter-Meter-p/dh-umii-6pii.htm

Multi-Parameter: Conductivity, TDS, Resistivity, pH, ORP, Temperature, Free Chlorine (FCE)
+/-1% Accuracy of Reading
Memory Storage: Save up to 100 samples w/ Date & Time stamp
Wireless Download Module Optional
Waterproof

 

Categories : Case Studies & Application Stories, Science and Industry Updates

Irrigation telecontrol system created that saves up to 20 percent of water per harvest

Posted by 14 Mar, 2011

Tweet   http://www.sciencedaily.com/releases/2011/03/110310070455.htm ScienceDaily (2011-03-10) — Researchers in Spain have developed an irrigation telecontrol system which will enable saving up to 20 percent of water for each harvest, compared to traditional irrigation methods. More at http://www.blog.MyronLMeters.com

Myronlmeters

 

http://www.sciencedaily.com/releases/2011/03/110310070455.htm

ScienceDaily (2011-03-10) — Researchers in Spain have developed an irrigation telecontrol system which will enable saving up to 20 percent of water for each harvest, compared to traditional irrigation methods.

More at http://www.blog.MyronLMeters.com

Categories : Science and Industry Updates

MyronLMeters.com Announces the Myron L Ultrapen PT1

Posted by 28 Feb, 2011

TweetMyronLMeters.com today announced the imminent release of a new Myron L product, the Myron L Ultrapen PT1, a reliable, easy-to-use pen-style meter that measures 3 parameters – conductivity, TDS, and salinity. FOR IMMEDIATE RELEASE San Diego, California, United States of America(Free-Press-Release.com) February 27, 2011 – MyronLMeters.com today announced the arrival of a new Myron L product, the […]

MyronLMeters.com today announced the imminent release of a new Myron L product, the Myron L Ultrapen PT1, a reliable, easy-to-use pen-style meter that measures 3 parameters – conductivity, TDS, and salinity.

FOR IMMEDIATE RELEASE

San DiegoCaliforniaUnited States of America(Free-Press-Release.com) February 27, 2011 –


MyronLMeters.com today announced the arrival of a new Myron L product, the Myron L Ultrapen PT1, a reliable, easy-to-use pen-style meter that measures 3 parameters – conductivity, TDS, and salinity.

“The Myron L Ultrapen PT1 will be available soon

Myron L Ultrapen Conductivity TDS Salinity Meter

Myron L Ultrapen Conductivity TDS Salinity Meter

at MyronLMeters.com,” said James Rutan, president, “and it’s going to be a great seller. The Pocket Tester’s convenience, durability, accuracy, and reliability are unmatched in the industry. It comes complete with a battery installed (and an extra), holster, lanyard, scoop, and instructions. The Myron L PT1 is waterproof, has fully secured circuitry and, as always, MyronLMeters.com has made it easy to order. At MyronLMeters.com, you get a 10% discount…just for ordering online. In addition, all Myron L meters in stock will ship the next business day. The quality of the Ultrapen PT1 and the company’s great reputation for reliable meters is sure to make this a big hit. It even looks great!”

Myron L meters are renowned for their accuracy, reliability, and ease of use, and have applications in automatic rinse tank controls, boiler and cooling towers, circuit board cleanliness testing, deionized water, environmental applications, fountain solutions, dialysis, horticulture, hydroponics, ORP (oxidation reduction potential)/Redox, pool and spa, reverse osmosis, textiles.

MyronLMeters.com has a well-established a web presence on Facebook, Gravatar, Twitter, Squidoo, LinkedIn, and WordPress. MyronLMeters.com encourages customers to join them on these sites for special offers and discounts.

More at http://www.myronlmeters.com


Categories : Product Updates

MyronLMeters.com Announces the Arrival of the Myron L Ultrameter III 9P

Posted by 17 Feb, 2011

MyronLMeters.com today announced the arrival of a new Myron L product, the Myron L Ultrameter III, a reliable, easy-to-use meter that measures 9 parameters – conductivity, resistivity, TDS, alkalinity, hardness, saturation index, ORP/free chlorine, pH and temperature.

Myron L Ultrameter III 9P

MyronLMeters.com today announced the arrival of a new Myron L product, the , Myron L Ultrameter III 9P , a reliable, easy-to-use meter that measures 9 parameters – conductivity, resistivity, TDS, alkalinity, hardness, saturation index, ORP/free chlorine, pH and temperature.

“The Ultrameter III is available right now at MyronLMeters.com,” said James Rutan, president. “We’ve made it easy to order, offer great training videos, technical bulletins, manuals, and a 10% discount…just for ordering online. In addition, all Myron L Meters in stock will ship the next business day. The quality of the Ultrameter III and the company’s great reputation for reliable meters is sure to make this a big hit. Don’t forget – this new Ultrameter has wireless data transfer capability when you buy the bluDock.  Expect about a 10 day lead time for a week or so.”

MyronLMeters.com carries the full line of Ultrameter III accessories, including the Ultrameter III 9PTK AHL Titration kit, soft protective case, replacement sensors, and the full line of standard solutions and buffers – all at a 10% discount when you order online.

Myron L meters are renowned for their accuracy, reliability, and ease of use, and have applications in automatic rinse tank controls, boiler and cooling towers, circuit board cleanliness testing, deionized water, environmental applications, fountain solutions, dialysis, horticulture, hydroponics, ORP (oxidation reduction potential)/Redox, pool and spa, reverse osmosis, textiles.

MyronLMeters.com has a well-established web presence on Facebook, Gravatar, Twitter, Squidoo, LinkedIn, and WordPress. MyronLMeters.com encourages customers to join them on these sites for special offers and discounts.

Tags: MyronLMeters.com, Myron L, Myron L meters, Ultrameter III, conductivity, resistivity, TDS, alkalinity, hardness, saturation index, ORP/free chlorine, pH and temperature, automatic rinse tank controls, boiler and cooling towers, circuit board cleanliness testing, deionized water, environmental applications, fountain solutions, dialysis, horticulture, hydroponics, ORP (oxidation reduction potential)/Redox, pool and spa, reverse osmosis, textiles

Categories : Product Updates

Soil science: Healing our planet’s ills from the ground up

Posted by 12 Feb, 2011

Tweet http://www.sciencedaily.com/releases/2011/02/110209151312.htm ScienceDaily (2011-02-09) — Soil depletion hastened the collapse of at least one society, the Greeks, and contributed to economic hardship as recently as the last century in the Great Plains of the United States.  With climate change and population growth affecting the services provided by soil, a team of scientists say more attention should be […]

http://www.sciencedaily.com/releases/2011/02/110209151312.htm

ScienceDaily (2011-02-09) — Soil depletion hastened the collapse of at least one society,

the Greeks, and contributed to economic hardship as recently as the last century in the

Great Plains of the United States.  With climate change and population growth affecting

the services provided by soil, a team of scientists say more attention should be paid to

protecting and rejuvenating soil. Strategies for doing so include refocusing and boosting

research, and communicating its importance to the public.

Categories : Uncategorized