New Ultrapen Resources: MyronLMeters.com

Posted by 8 Apr, 2014

 

New Ultrapen Resources


New Ultrapen Resources

YouTube, Myron L Meters Blog, and Product Pages

At Myron L Meters, we’ve been busy lately updating our YouTube Channel to bring you the latest product overviews, calibration, care and maintenance, and product features videos. We’ve been keeping them short and focused because we know you’re busy. We’re creating similar blog posts so you will always have your choice of video instruction overview and handy print reference. Have suggestions for videos?  Would you like a branded video for your company? Let us know at MyronLMeters@gmail.com.

Myron L Meters presents a review of the Ultrapen PT2 that measures pH. In this video, we cover the steps for measuring pH, changing the temperature setting, changing the pH measurement mode, and overall features.

Click to find out how!
“The Ultrapen PT2 is compact, reliable, easy to use and so far seems very durable while riding in its carry case between measurements. I use it daily and it reliably delivers PH and temperature.”
Calibration of the Ultrapen PT3 ORP Pen
The factory recommends calibrating twice a month, depending on usage. However, you should check the calibration whenever measurements are not as expected.
NOTE: If the measurement is NOT within calibration limits for any reason, “Error” will display. Check to make sure you are using a proper ORP calibration solution. If the solution is correct, clean the sensor as described im the manual under Routine Maintenance. (Reconditioning the sensor should not be necessary due to the high ionic strength of the calibration solutions.) Restart calibration.
NOTE: Small bubbles trapped in the sensor may give a false calibration. After calibration is completed, measure the ORP calibration solution again to verify correct calibration. Remember, in measurement mode you must manually correct for temperature variance from 25ºC. Example: At 25ºC, ORP2602OZ calibration solution will read 260mV; however, at 20.0ºC ORP2602OZ will read 265mV.
NOTE: If at any point during calibration, you do not submerge the sensor in solution
before the flashing slows, allow the PT3 to turn off and start over.
READ MORE
Our Ultrapen PT1 product overview video has been embedded on a Russian water products company website.


Want to stay up-to-date with Myron L Meters products?  Check out our blog and subscribe to our YouTube Channel.  You’ll get the latest maintenance tips, product updates, and more…
Cool Customers
At Myron L Meters, we think all of our customers are cool, but when this guy ordered an Ultrameter II 6P we thought it was VERY cool. Thank you, Jason Statham. It just goes to show you that – even if you’re expendable – you want your meter to last.
You’ll find our complete selection of Ultrapens HERE.
Facebook
Facebook
Twitter
Twitter
Website
Website
Email
Email
Pinterest
Pinterest
YouTube
YouTube
Google Plus
Google Plus
Tumblr
Tumblr

Copyright© , All rights reserved. 

 

Categories : Care and Maintenance, Product Updates, Technical Tips, Videos
loading comments...